HP Officejet 7115 - replace the ink cartridges

background image

replace the ink cartridges

Front-panel display messages appear under the following conditions to let you

know that you should replace your ink cartridges.

Low ink levels

Ink cartridges are approaching their expiration dates
Caution! If you ignore the messages and do not replace the ink

cartridges, eventually the HP Officejet will stop working

completely to avoid damaging the printheads.

See the Support and Specifications booklet for information on ordering

replacement ink cartridges.

Copper

contacts

Release button

Plastic tape

Do not touch the copper contacts, and hold the

cartridge away from you as you remove the plastic

tape so the ink does not spill on you or your clothing.

GroPlusRG.book Page 63 Wednesday, October 16, 2002 1:16 PM

background image

hp officejet 7100 series

chapter 8

64

1

Turn on the unit, then open the print-carriage access door by lifting the

handle until the door locks into place.
The print carriage moves to the center of the unit.

2

After the carriage stops moving, press the gray button to release the ink

cartridge, then pull it up and out of its slot.
Caution! To avoid damaging the printer, remove an ink cartridge

only when a replacement is available. If an ink cartridge is

removed without being replaced:
– Close the print carriage and the print-carriage access door.
– Replace the ink cartridge within 24 hours.
– Never remove an ink cartridge and a printhead at the same time.

3

Remove the new ink cartridge from its packaging and, being careful to

touch only the black plastic, gently remove the plastic tape.
Caution! Hold the cartridge away from you as you remove the

plastic tape so the ink does not spill on you or your clothing.

GroPlusRG.book Page 64 Wednesday, October 16, 2002 1:16 PM

background image

reference guide

maintain your hp officejet

65

Caution! Do not touch the copper contacts.

4

Push the new ink cartridge firmly down into the appropriate slot until it

clicks into place.
Note the color bars on the print carriage.
The ink-cartridge label should be face-up after the cartridge is inserted.

place the ink cartridges into their respective slots on the left and right

5

Close the print-carriage access door.